天然气长输管道离心式压缩机组能耗对比分析研究

为了计算和分析离心式压缩机组在天然气长输管道的实际能耗,本研究对不同机组的驱动电机、不同运行工况进行对比,利用类比法对压缩机进行性能分析.通过对新老机组的机械特性、工艺性能进行实测,本研究对比分析了新老机组的运行工作效率,同时,对单台机组与两台机组运行的各个参数进行了对比分析,并计算出了机组不同运行方式的工作能耗,研究结果表明:在相同压缩机的前提下,不同型号驱动电机的节能效果存在明显不同;长输管道工艺运行特点影响机组的组合运行方式,随着机组的防喘振工况点变化,机组的运行效率也会发生变化,直接影响压缩机组的能耗.     

水产品及养殖水中丁香酚类化合物风险研究

目的 检测水产品及养殖水中丁香酚类化合物。方法 应用食品补充检验方法BJS 201908《水产品及水中丁香酚类化合物的测定》，以海水鱼、淡水鱼、海水虾、淡水虾及养殖水作为基质，测定6种丁香酚类化合物的含量。结果 通过对实际样品测定后发现，在水产品中检出了丁香酚类化合物，主要为丁香酚，检出率为28.9%，其中海水鱼相对突出。结论 本研究为丁香酚作为渔用麻醉剂提供了方法论，为丁香酚类化合物在水产运输的合理使用提供理论依据。     

Weissella cibaria short-fermented liquid sourdoughs based on quinoa or amaranth flours as fat replacer in focaccia bread formulation

Production of the traditional Italian Focaccia bread (FcBread) requires reformulation to meet the new rules for healthier foods. We tested the applicability of a short-fermented (15 h) liquid sourdough (LS) (dough yield, DY, 250), obtained using quinoa (Q) or amaranth (Am) flour fermented with a Weissella cibaria strain (C43-11) producing exopolysaccharides (EPS) as fat replacer in yeast-leavened FcBread. The LSs were applied during the FcBread-making process at industrial pilot plant, reducing the added fat amount by 20% (FcBread-QLS and FcBread-AmLS) and products were compared with reference samples not containing EPS. All the products were analysed for physico-chemical properties (pH, TTA, organic acids, protein content and profile, instrumental colour), textural properties, sensory quality and glycemic index. The application of both pseudo-cereal-based W. cibaria LSs in FcBread allowed obtaining products with a reduced amount of fat, increased protein amount, mainly due to the albumin and glutenin/glutelin fractions, reduced glycemic index, improved texture and preserved in the traditional sensory profile of ‘focaccia’.     

A fuel cell powered autonomous surface vehicle: The Eco-SWAMP project

Autonomous surface vehicles are becoming consolidated robotic tools for marine, coastal and inland surveys. Autonomous surface vehicles are usually equipped with electronic instruments to perform remotely controlled or autonomous geo-morphological, biological, chemical, physical analyses and data collection. Actually, well-established solutions provide battery power but the research focuses on introducing a fuel cell to decrease the environmental impact meanwhile increasing the cruising range. In this paper, the design of the Eco-SWAMP, a fuel cell powered autonomous surface vehicle, is presented starting from its battery-powered version, the SWAMP prototype. The experimental power consumption profile of the SWAMP during four missions is analysed to define the primary energy sources ratings of the Eco-SWAMP. After a commercial choice of primary sources, power management algorithms are designed and compared in MATLAB/Simulink environment by simulation results. The proposed procedure can be easily applied to any autonomous marine vehicle.     

Experimental investigation on the cracking of pre-combustion cracking gas with gliding arc discharge plasma

To improve the quality of pre-combustion cracking gas, the gliding arc discharge plasma is adopted in this paper. The influence of incoming flow rate, electrode gap distance and discharge frequency on cracking effect have been experimentally studied. The results show that through plasma cracking, the concentration of H₂ increases while the concentration of CH₄ and C₂H₄ decrease. With different fuel ratio conditions, the variation trend of C/H ratio as well as the mass flow of carbon and hydrogen atoms in the cracking products vary from each other. The cracking effect becomes weaker with the increase of incoming flow rate, while is better when the fuel ratio is larger. Given the flow rate of 18slpm and 24slpm, the best cracking effect can be acquired with the electrode gap of 1.5 mm. Besides, the effect of gliding arc discharge plasma cracking is weakened as the discharge frequency rises.     

First genetically verified occurrence of Ligula pavlovskii outside its native range and characteristics of its infection in Neogobius fluviatilis

In this study, we provide the first genetically verified distribution record beyond its native range of Ligula pavlovskii, a high-impact endoparasite of Ponto-Caspian gobies. According to parasitological surveys, ligulosis was detected for the first time in monkey goby individuals collected from Lake Balaton in 2004, 34 years after the first record of monkey goby in the lake. During a Lake Balaton survey in 2018, we detected tapeworms in 44.4% of the sampled monkey gobies. This prevalence is about two to ten times higher than it was reported from within the native range of the fish hosts. The same survey revealed an uneven spatial distribution of the ligulosis in the monkey gobies inhabiting different shoreline sections of the lake. We assume that the occurrence and recent distribution data of this high-impact endoparasite may provide useful information for potential biocontrol measures of invasive Ponto-Caspian gobies in the future.     

哈尔滨典型街谷空间PM2.5分布场与绿色界面指数相关性 研究

在城市化快速进程的背景下，城市 街区PM2.5污染日益严重，本文选取哈尔滨 在不同季节的典型街谷空间，对以叶面积密 度（LA D）、叶面积指数（LAI）为实测要素 的绿色界面指数以及PM2.5浓度进行实测对 比研究。通过对实测数据的分析和挖掘，最 终得出如下结论：首先，典型街谷空间PM2.5 时段浓度呈现上午比下午平均高37.75%，冬 季比夏季高4.7倍的特征；其次，街谷空间的 灌木界面对PM2.5浓度场平均积极贡献率为 18.62%；最后，对PM2.5的衰减率与实测街 谷绿色界面的叶面积密度（LAD）与叶面积 指数（LAI）进行相关性分析，结果显示街谷 绿色界面对PM2.5浓度的衰减作用与叶面积 密度（LAD）呈显著负相关关系，与叶面积指 数（LAI）的相关性程度较弱。     

一维普鲁士蓝/硅藻土复合材料对Cs+的吸附

含137Cs的放射性废水处理在核能及核技术应用中具有重要意义。以表面活性剂十六烷基三甲基溴化钾和十二烷基磺酸钠为模版，合成了一维结构的普鲁士蓝并将其附着在硅藻土表面，制备成一维普鲁士蓝/硅藻土复合材料；在不同的温度、吸附时间、pH值下，分别探究了一维普鲁士蓝/硅藻土复合材料对Cs⁺的吸附性能，并研究了溶液中其他阳离子对吸附的影响。结果表明：一维普鲁士蓝/硅藻土对Cs⁺的吸附能力随温度（293～318 K）的升高而增加（从42.4 mg/L到61.6 mg/L），其吸附行为符合Langmuir等温线和准二级动力学方程。     

透明红外硫系薄膜非均匀性检测及影响因素

薄膜非均匀性的无损检测对于制备大面积高质量的红外透明薄膜尤为重要。针对红外薄膜光学均匀性难以获取的困难,提出了一种同时获得单层透明红外薄膜厚度和折射率均匀性的无损检测方法。实验上,通过磁控溅射法在二氧化硅衬底上制备了厚度约1.4μm红外透明Ge-Sb-Se硫系薄膜,然后在该薄膜上标定出36个80μm×80μm区域,利用显微傅里叶红外光谱仪测得该36个区域的透射谱,通过分段滤波的方法滤除背景噪声,运用改进的Swanepoel方法计算得到了薄膜每一个区域的厚度和折射率,进而精确获得该薄膜的厚度和折射率均匀性,结果表明精度优于0.5%。